Barrier Plus is a high-solids epoxy primer with very high zinc dust content for severe corrosive environments. Barrier Plus’s high level of zinc dust provides excellent corrosion protection when used as part of a complete coating system where extended durability is required. It is ideal as a primer in atmospheric environments, and can be used on carbon steel, for repair of inorganic zinc silicate coatings and on damaged galvanised steel substrates. Barrier Plus complies with ASTM D520 type II zinc dust and can be applied down to 0 °C surface temperature. It is recommended for offshore environments, refineries, power plants, bridges, buildings and on structural steel and piping exposed in corrosivity categories up to CX (ISO 12944-2). Barrier Plus shows superior performance in adhesion/cohesion and electrical conductivity when compared to traditional zinc rich epoxy coatings.
Pre-qualified in accordance with NORSOK M-501 in selected systems.
Meets the requirements of RCSC Class B, Appendix A.
Meets the requirements of AS4100 Appendix J (Slip Factor).
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative
Barrier 80 S is a high-solids epoxy primer with 80% zinc dust for severe corrosive environments.
An epoxy primer with excellent impact and abrasion resistance containing 20% glass flakes.
Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.
A video is being shown