Barrier 80 S
Barrier 80 S is a high-solids epoxy primer with 80% zinc dust for severe corrosive environments.
- For severe corrosive environments
- Fast dry-to-recoat
- Fast dry-to-handle
Jotacote F60 is a pure epoxy outfitting primer. Jotacote F60 can be used as a primer, midcoat, finish coat or as a single-coat system in atmospheric and immersed environments. It has a wide temperature resistance ranging from cryogenic (-196C) to hot (210C) and can be applied in a wide range of thicknesses. Jotacote F60 can be used in water ballast tanks as a holding primer when part of a relevant system approved according to PSPC IMO Res. MSC 215(82). It can be applied on properly prepared carbon steel, shop primed steel, stainless steel, aluminium, galvanised steel, glass fibre reinforced polyester and thermally sprayed zinc surfaces.
Certified in accordance with IMO Res.215(82) – PSPC Water Ballast Tanks
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.
Barrier 80 S is a high-solids epoxy primer with 80% zinc dust for severe corrosive environments.
A video is being shown