Jotafloor Topcoat E is a high-performance, two-component, amide-cured, solvent-free epoxy coating. It’s the ideal choice for medium duty industrial flooring, and it can also be used for vertical application on walls. Jotafloor Topcoat E has excellent gloss and colour retention, as well as remarkable chemical resistance, abrasion-resistance and impact-resistance capability.
Jotafloor Topcoat E is an excellent choice for a sustainable and eco-friendly solution to your flooring needs. It is a part of Jotun’s Green Building Solutions, a set of carefully chosen green building products, ranging from decorative paints and architectural powder coatings to fireproofing, flooring and protective coatings. The products in this collection have been independently tested and deemed compliant with the most stringent green building rating systems.
This sustainable coating can be used in commercial buildings, educational facilities, healthcare centres, hospitality infrastructures, public buildings and residential homes. It is an ideal choice wherever there is a requirement for durability and colour choice. It’s easy to apply and completely tintable using Jotun’s Multicolor Industry™ (MCI) system, which produces coatings in a wide array of colours.
Determination of Compressive Strength - ASTM C579:2012 & BS6319-2:1983.
Determination of Tensile Strength - ASTM C307 & BS 6319-7:1985.
Determination of Rapid Chloride Permeability – ASTM C 1202:2012.
Determination of Water Permeability – BS EN 12390-8:2009.
Determination of Resistance to growth of mold - ASTM D 3273-94.
Determination of Imapact Resistance -ASTM D2794.
Determination of Taber Abrasion (1000 cycles) - ASTM D4060.
Determination of Pull of Strength - ASTM D 4541/ASTM D 7234.
Determination of Chemical Resistance - ASTM D543.
This product contributes to Green Building Standard credits by meeting the following specific requirements:
LEED®v4 (2013) / LEED®v4 .1 (2019):
EQ credit: Low emitting materials
- VOC content for floor coatings (100 g/l) (CARB(CSM)2007) and emission between 0.5 and 5.0 mg/m³ (CDPH method 1.2)
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2016)
Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2013)
Hea 02: VOC content for Two-pack performance Coatings SB (500 g/l) (EU Directive 2004/42/CE).
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.
Jotafloor SF PR 150 is an epoxy resin primer that offers superior application on concrete floors.
A high performance, high solids, non-yellowing, isocyanate-cured polyurethane coating.
A low VOC, self-levelling, solvent-free and polyurethane-based hybrid antimicrobial flooring system.
Jotafloor Sealer has excellent penetration properties and seals a surface by levelling it as it enters all the pores.