Penguard Express is a fast drying, high-build, high-solids epoxy coating. Penguard Express is specially designed for new construction and can be used as a primer, midcoat, finish coat or as a single-coat system in atmospheric conditions. Penguard Express has very fast dry-to-recoat or dry-to-handle properties. It has a wide application temperature range from -5C to 40C.
Penguard Express is suitable to use on properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub-zero surface temperatures. Penguard Express is approved for NORSOK system 1 and is suitable for application up to C5 environment.
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
Tested in accordance with ISO 12944-5, C5-High environment.
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with
IMO 2010 FTP Code Ch. 8.
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.
Resist 78 is a primer with 78% zinc for severe corrosive environments.
Barrier 65 is a 65% zinc dust epoxy primer for corrosive environments
Penguard HSP ZP is a fast drying, high-build epoxy coating with active zinc phosphate.
Jotacote Universal N10 is a PSPC-approved high-abrasion resistant universal primer.