A solvent-based intumescent coating that provides cellulosic fire protection for structural steel.
- Majority of steel sections covered
- Easy airless spray application
- Ready to use
SteelMaster 1200WF
About
SteelMaster 1200WF is the most efficient thin-film waterborne intumescent coating for 120 minutes fire protection of structural steel exposed to cellulosic fire. It is ideal for structural steel exposed to a wide range of corrosive environments. SteelMaster 1200WF is low VOC, HAPs free, and has a low environmental impact. It is easy to apply with airless spray for quicker project completion.
Key features
- Low thickness required
- HAPs free
- Low VOC, low environmental impact
- Increases productivity
- Ready to use, easy airless spray application
- Quicker project completion
Technical details
-
Product Categories
fire_protection building_interior fire_protection--cellulosic_fire building_interior--interior_steel_protection_buildings
-
Technology
acrylic
-
Substrate
Coated surfaces Carbon steel Galvanized steel
Downloads
United Kingdom
Australia
Bangladesh
Brazil
Bulgaria
Cambodia
Canada
China
Czech Republic
Denmark
Egypt
Estonia
Finland
France
Germany
Greece
Hungary
India
Indonesia
Ireland
Italy
Japan
Kazakhstan
Latvia
Lithuania
Malaysia
Myanmar (Burma)
Netherlands
New Zealand
Norway
Oman
Pakistan
Philippines
Poland
Portugal
Qatar
Romania
Saudi Arabia
Singapore
South Africa
Spain
Sweden
Taiwan, Province of China
Thailand
Turkey
United Arab Emirates
United Kingdom
United States
Vietnam
Certificates and Approvals
BS 476 part 20/21: Certifire CF 5243
Cellular beams RT1356
EN 13381-8
CE marked product with European Technical Assessment ETA-20/1295
Reaction to Fire: Class B-s1, d0 (EN 13501-1)
Durability and Serviceability: Z2, Z1, Y (EAD 350402-00-1106)
Chinese GB14907:2018
ASTM E84: Class A
This product contributes to Green Building Standard credits by meeting the following specific requirements:
LEED®v4 (2013)
EQ credit: Low emitting materials
- VOC content for Fire Resistive Coatings (350 g/l) (CARB(CSM)2007) and emission 0.5 - 5.0 mg/m³ (CDPH
method 1.2)
LEED®v4 (2013)/LEED®v4.1 (2020)
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2016)
- Hea 02: VOC emission ((ISO 16000-series (2006) or CDPH method 1.1 (2010)/1.2 (2017)) and the VOC content for One-pack performance coatings (100 g/l).
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2013)
- Hea 02: VOC content for One-pack performance coating WB (140 g/l) (EU Directive 2004/42/CE)
BREEAM® NOR (2016)
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804) for Scandinavia.
- Mat 01: The product Safety Data Sheet confirms that the product does not contain any substances on the
Norwegian A20 list.
This product is tested by RISE Research Institutes of Sweden/SP Technical Research Institute of Sweden or Eurofins in accordance with California Department of Public Health (CDPH) Standard Method v1.1-2010
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.
Related Products
This solvent-free tank lining is suitable for potable water, grey water and crude-oil tanks.
- Tank lining with high chemical resistance
- Approved for potable water
A heat-resistant coating suitable from 205°C to -196°C with superior water and corrosion protection.
- Heat-resistant up to 205°C continuous
- Suitable for maintenance
- Can be applied on hot substrates up to 150°C