A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.
- Surface-tolerant
- Tintable
- Short overcoating intervals
About
Hardtop Optima is a polysiloxane topcoat with a durable, premium finish and excellent application properties. It has excellent colour- and gloss retention ensuring a long-lasting beautiful appearance. Excellent abrasion and chemical resistance contribute to keeping the beautiful finish. Hardtop Optima contains high-volume solids compared to traditional polyurethane, resulting in lower VOC per litre, and reducing the impact on the applicator and the environment. Hardtop Optima has excellent application properties with airless spray.
Hardtop Optima is ideal for sustainable projects targeting green building rating points like LEED v4 and BREEAM International. The topcoat does not contain isocyanates or generate di-isocyanates at elevated temperatures making it application- and work-friendly and a preferred topcoat for the HSE-conscious.
Key features
- Outstanding durability
- Excellent colour and gloss retention
- Isocyanate-free for a safer work environment
- Good chemical resistance
- Patented technology
Technical details
-
Product Categories
topcoats building_exterior topcoats--architectural_topcoats topcoats--industrial_topcoats building_exterior--exterior_steel_protection_buildings
-
Technology
polysiloxane
-
Substrate
Coated surfaces
Downloads
United Kingdom
Australia
Belgium
Brazil
Bulgaria
Canada
Chile
China
China (CN-KR)
Czech Republic
Denmark
Egypt
Estonia
Finland
France
Germany
Greece
Hungary
India
Indonesia
Ireland
Italy
Japan
Kazakhstan
Korea, Republic of
Latvia
Lithuania
Malaysia
Mexico
Morocco
Netherlands
New Zealand
Norway
Oman
Pakistan
Philippines
Poland
Portugal
Qatar
Romania
Russia
Saudi Arabia
Serbia
Singapore
Slovak Republic
Slovenia
South Africa
Spain
Sweden
Taiwan, Province of China
Thailand
Turkey
United Arab Emirates
United Kingdom
United States
Vietnam
Certificates and Approvals
NORSOK System 1, Rev.5
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with
IMO 2010 FTP Code Ch. 8.
This product contributes to Green Building Standard credits by meeting the following specific requirements:
LEED®v4 (2013)
EQ credit: Low emitting materials
- VOC content for Industrial Maintenance Coatings (250 g/l) (CARB (SCM) 2007) and emissions lower than or equal to 0.5 mg/m³ (CDPH method 1.1).
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).
LEED® (2009)
- IEQ Credit 4.2: The VOC requirements of Green Seal Standard GC-03, 1997.
BREEAM® International (2016)
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2013)
- Hea 02: VOC content for Two-pack performance Coatings SB (500 g/l) (EU Directive 2004/42/CE).
BREEAM® NOR (2012)
- Hea 9: VOC content for Two-pack performance Coatings SB (500 g/l) (EU Directive 2004/42/CE) and emission demands (ISO 16000-9/10).
- Mat 1.5: This product Safety Data Sheet confirms that the product does not contain any substances on the Norwegian A20 list.
This product is tested by RISE Research Institutes of Sweden/SP Technical Research Institute of Sweden or Eurofins in accordance with ISO 16000-series and CDPH method 1.1 (2010)/1.2 (2017), and passes the demands of the French AFSSET (2011), German AgBB (2017), Belgian decree (2014) and Finnish M1.
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.
Related products
Resist 86
Resist 86 is an 85% zinc ethyl silicate primer for severe corrosive environments.
- Designed for severe corrosive environments
- Fast dry-to-recoat
- Fast dry-to-handle
Penguard Express MIO
Penguard Express MIO is a fast-drying, high-build epoxy coating enforced with MIO for new construction.
- Enforced with Micaceous Iron Oxide (MIO)
- Fast dry-to-recoat
- Fast dry-to-handle
Jotamastic 87 is a surface-tolerant high build epoxy mastic primer designed for maintenance and repair.
- Surface-tolerant
- More than 30 years track record
- Long lifetime in high corrosivity environments